Home News Company news
Contact us
Mobile:138 2918 8826
Fax:+86-769-85353147
E-mail:king@auto-king.net
Address:
Global service center
Domestic: Dongguan, South China, Kunshan, East China Overseas: Thailand, Vietnam, Malaysia
Company news
Mold cleaning and maintenance expert--Mold pipe Beijing cleaning machine ★ effort and worry!
Date:2018-01-15 16:05:02    Source:King Automation Equipment Co.,Ltd    Click:

How the ultrasonic cleaner works:

Ultrasonic cleaning machine uses several times of vibration sound waves higher than 17-30KHz per second to produce millions of tiny bubbles in a solution prepared by special cleaning agents. These small bubbles are rapidly compressed and expanded during the process. The irregular shape of the object to be cleaned or the dirt in the slit is shaken off the surface for cleaning purposes.
Ultrasonic cleaning machine structure generally has ultrasonic power supply and cleaning device integrated or separate layout two forms, generally low power (200W or less) cleaning machine uses a one-piece structure, while the high-power cleaner uses a split structure. Ultrasonic cleaning machine split structure consists of three main parts
(1) cleaning cylinder; (2) ultrasonic generator; (3) ultrasonic transducer.
Cleaning cylinder: The cleaning cylinder is a stainless steel container used to load the cleaning fluid and the workpiece to be cleaned. Most of the workpieces can be installed in the mesh frame and then placed in the cylinder for cleaning.
Ultrasonic generator: Ultrasonic generator for ultrasonic cleaning machine, which can be divided into electronic tubes from the types of components used. Silicon controlled and transistor type. In recent years, it has been developed to use high-power "power modules". Its output power ranges from tens of watts up to several kilowatts and its operating frequency ranges from 15 kHz to 40 kHz.

The high-frequency oscillating signal emitted by the ultrasonic generator is converted into a high-frequency mechanical oscillation by the transducer and propagated to the medium---cleaning solvent, and the ultrasonic waves are radiated in the washing liquid in a dense phase, so that the liquid flows and generates Tens of thousands of tiny bubbles of 50-500 μm in diameter are formed and grown in the negative pressure region of the longitudinal propagation of the ultrasonic waves, and are rapidly closed in the positive pressure region. (Mold cleaning and maintenance expert - mold pipe cleaning machine: Tel: +86-769-85353145)